Default memory double-data-rate 3 (DDR3) error-correction-code (ECC) DRAM
(Combined control/services/data planes)
NA
Maximum memory DDR3 ECC DRAM (Combined control/services/data planes)
NA
Default memory DDR3 ECC DRAM (data plane)
2 GB
Maximum memory DDR3 ECC DRAM (data plane)
2 GB
Default memory DDR3 ECC DRAM (control/services plane)
4 GB
Maximum memory DDR3 ECC DRAM (control/services plane)
16 GB
Default flash memory
8 GB
Maximum flash memory
32 GB
External B 2.0 slots (type A)
2
B console port -type B mini (up to 115.2 kbps)
1
Serial console port - RJ45 (up to 115.2 kbps)
1
Serial auxiliary port - RJ45 (up to 115.2 kbps)
1
Power-supply options
Internal: AC, DC and PoE
Redundant power supply
Internal: AC, DC and PoE
AC input voltage
100 to 240 VAC autoranging
AC input frequency
47 to 63 Hz
AC input current range, AC power supply (maximum)
7.1 to 3.0A
AC input surge current
<50 A
Typical power (no modules) (watts)
158
Maximum power with AC power supply (watts)
450 (no PoE)
Maximum power with PoE power supply (platform only) (watts)
1000 with PoE redundant
1450 with PoE boost no redundancy
Maximum endpoint PoE power available from PoE power supply (watts)
500 W with optional redundancy
Maximum endpoint PoE power capacity with PoE boost (watts)
950 W no redundancy
ISR4451-X-AX/K9 integrated router combines high-performance, scalability, Data Center features and smart router is made to run multiple services. This is the only router in indtry separates control data and services planes, so the benefits are numero. With pay-as-you-grow performance, you can increase forwarding capacity when needed, you only pay for the performance you need. The ISR4451-X-AX/K9 runs multi-core, multi-threaded advanced secruity IOS-XE operating system to enable both WAN link security and MPLS and OTV services. Full featured WAN optimization with that run native on the motherboard without affecting performance, management and other capabilities. According to the scalability, ISR 4451 designed as a layer 7 router basically, the advanced network services enable the branch to utilize the WAN intelligently is really what ISR 4400 series all about.The Cisco ISR 4451 is the ultimate application delivery platform to mid-size or even large branch offices. This is literally routing redefined.
Quick Specs
Figure 1 shows the appearance of Cisco ISR4451-X/K9 for reference. ISR4451-X-AX/K9 is similar with it.
Table 1 shows the Quick Specs.
Product Code
ISR4451-X-AX/K9
Aggregate Throughput
1 Gbps to 2Gbps
Total onboard WAN or LAN 10/100/1000 ports
4
RJ-45-based ports
4
SFP-based ports
4
Enhanced service-module (SM-X) slot
2
NIM (Network Interface Modules) slots
3
Onboard ISC slot
1
DDRM (data plane)
2 GB (default) / 2 GB (maximum)
DDRM (control/services plane)
4 GB (default) / 16 GB (maximum)
Flash Memory
8 GB (default) / 32 GB (maximum)
Power-supply options
Internal: AC, DC (roadmap) and PoE
Rack height
2 RU
Dimensions (H x W x D)
88.9 x 438.15 x 469.9 mm
Product Details
Figure 2 shows the front panel of Cisco ISR4451-X/K9for reference. ISR4451-X-AX/K9 is similar with it..
?
Note:
①
AC power supply unit (PSU0)
④
Router power On/Off switch
②
Router fan tray
⑤
LEDs
③
AC power supply unit (PSU1)
?
·Router fan tray is hidden behind removable bezel.
·LEDs include 12 indicators.
Table 2 shows the LED descriptions.
LEDs
Represents
Color
Description
PSU
Power Supply Unit (P0 and P1) Stat
Green
PSU is on and is providing power.
Amber
PSU is on but with errors or in a failure condition.
Off
Power supply is turned off.
GE POE
Internal PoE Daughter Card Stat
Green
PSU is installed and providing power
Amber
PSU is installed but in a failure condition.
Off
PSU is off.
FLASH
System Flash Stat
Blinking Green
Compact flash/eB flash is present and currently being accessed.
TEMP
Temperature Stat
Solid green
All temperature sensors in the system are within acceptable range.
Amber
One or more temperature sensors in the system are outside the acceptable range.
Off
Temperature is not being monitored.
PWR
System Power
Green
System power is on and functioning correctly.
Green blinking
System power is in the process of shutting down.
Amber
System power is up, but low level initialization failed.
Amber blinking
System power is up, but the system failed to come out of reset.
Off
System power is off.
POE BOOST
Power Over Ethernet Boost Mode
Green
Two PoE power supplies are installed and operating in boost mode.
Off
This can mean one of the following:
·No PoE PSU installed.
·One PoE PSU installed.
·Two PoE PS installed and operating in redundant mode.
ISC
ISC Slot Stat
Green
PVDM4 is present and enabled.
Amber
Initialized with error.
Off
Not present.
FAN
Fan Stat
Green
All fans are operating.
Amber
One fan has stopped working.
Blinking Amber
Two or more fans have stopped working, or the fan tray has been removed.
Off
Fans are not being monitored.
STAT
System Stat
Solid green
System operating normally.
Blinking amber
BIOS/Rommon is booting.
Amber
BIOS/Rommon has completed booting, and system is at Rommon prompt or booting platform software.
Off
System is not out of reset or BIOS image is not loadable.
Figure 3 shows the back panel of Cisco ISR4451-X/K9?for reference. ISR4451-X-AX/K9 is similar with it..
?
Note:
①
B Type A port
⑤
Auxiliary port
②
GE management port
⑥
GE Ports
③
B Type B mini port
⑦
NIM Slots
④
Console port
⑧
SM-X Slot
·The NIMs support 2 single-wide or 1 double-wide.
·The GE Ports include 4 RJ45 ports and 4 SFP ports.
The Modules, Cards, Licenses & Accessories
Table 3 shows some recommended modules, cards, licenses and several cables.
For all orders exceeding a value of 100USD shipping is offered for free.
Returns will be accepted for up to 10 days of Customer’s receipt or tracking number on unworn items. You, as a Customer, are obliged to inform us via email before you return the item.
Otherwise, standard shipping charges apply. Check out our delivery Terms & Conditions for more details.
Returns will be accepted for up to 10 days of Customer’s receipt or tracking number on unworn items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
– Received the wrong item. – Item arrived not as expected (ie. damaged packaging). – Item had defects. – Over delivery time. – The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.
Recently Viewed
Don't forget! The products that you viewed. Add it to cart now.
People Also Bought
Here’s some of our most similar products people are buying. Click to discover trending style.
