RV340W-E-K9-G5 Specification |
WAN ports |
2 RJ-45 Gigabit Ethernet |
|
LAN ports
|
4 RJ-45 Gigabit Ethernet
(LAN 1, 2, 3, 4 and LAN 9, 10, 11, 12 are PoE 802.3at, max 30W per port up to 120W total)
|
Console/serial |
1 RJ-45 port for future use. Port is disabled |
|
USB
|
2 for external 3G/4G modem or flash drive (USB-3, USB-2) |
|
Firewall
|
Stateful packet inspection, up to 980 Mbps throughput for TCP and UDP |
|
Quality of Service (QoS)
|
Traffic Classes, WAN Queuing, WAN Policing, WAN Bandwidth Management, Assign detailed QoS (Class of Service (CoS)/Differentiated Services Code Point (DSCP)/policies) settings per application or end device |
|
Web Security
|
Dynamic web filtering: Cloud based, more than 80 categories, more than 450 million domains classified |
|
Application Visibility
|
Application identification: Assign policies to Internet applications
500 unique Apps
|
|
Client Identification
|
Identifies and categorizes clients dynamically. Assigns policies based on end device category and operating system. |
|
Intrusion Prevention System
|
IDS/IPS inspects network packets, logs and/or blocks a wide range of network attacks. It delivers increased network availability, faster remediation, and comprehensive threat protection.
HTTP/FTP/SMTP/POP3/IMAP
|
|
Antivirus
|
Protection from viruses, trojans, spyware, and identity theft by inspecting traffic going through the router.
HTTP/FTP/SMTP/POP3/IMAP
|
|
Cisco Umbrella
|
First line of defense for threats on the Internet. Prevention for user and malware-initiated connections. Protection against Malware, C2 callbacks, and phishing. Proxy inspection for risky domains. |
|
IPSec
|
IKEv1 and IKEv2
50 simultaneous connections (any combination of remote access and site-to-site), up to 650 Mbps throughput
|
|
IPsec remote access
|
Yes (remote access from any standards-based IPsec client and Cisco IPsec VPN EasyVPN) |
Layer 2 Tunneling Protocol (L2TP) over IPsec |
Yes |
Generic Routing Encapsulation (GRE) over IPsec |
Yes |
|
Cisco SSL VPN (Cisco AnyConnect)
|
Maximum 50 SSL VPN tunnels and up to 33Mbps throughput. Also requires Cisco AnyConnect end user licenses to use on the end device. Ideal for mobile devices. |
Point-to-Point Tunneling Protocol (PPTP) |
25 connections, up to 100 Mbps throughput |
|
Teleworker mode (Cisco IPsec VPN)
|
Router acts as a client to connect to central VPN gateway in teleworker mode |
VPN pass-through |
IPSec, PPTP, L2TP |
|
Management protocols
|
Web browser (HTTP/HTTPS)
Simple Network Management Protocol (SNMP) v1, v2c, and v3
Representational State Transfer (REST) API
NETCONF
|
Management Platform |
FindIT Network Manager |
|
Firmware upgrade options
|
Via local PC, USB stick, or from Cisco.com via web browser.
Unattended automatic firmware upgrade.
|
LAN |
VLAN |
Up to 32 VLANs |
Port Security |
Yes, 802.1X |
Link aggregation |
Yes (static, no LACP) |
IPv6 |
Dual stack, 6rd, 6in4, Dual stack lite |
|
WAN
|
DHCP client, static IP, PPPoE, PPPTP, L2TP, transparent bridge |
|
Routing
|
Static routing, IGMP proxy, Inter-VLAN routing, Routing Information Protocol RIPv1,v2, RIPng |
|
Network Address Translation (NAT)
|
Port Forwarding
Port Address Translation (PAT)
One-to-one NAT
VPN NAT traversal
Session Initiation Protocol (SIP) Application-Level Gateway (ALG), FTP ALG
|
NAT max sessions |
>40000 |
NAT max connections per second |
3000 |
|
DynDNS
|
ChangeIP.com, DynDNS.com, No-IP.com, dnsomatic |
IPv6 transition |
Dual Stack |
|
Hardware DMZ
|
Yes (when enabled, one LAN port will be DMZ port) |
DMZ host |
Yes |
System |
|
CPU
|
ARM-based architecture, dual core, hardware flow engine
1.2 Ghz
|
RAM |
1 GB DDR3 |
Flash |
256 MB |
Wireless |
|
Standards
|
IEEE 802.11ac, 802.11n, 802.11g, 802.11b, 802.11a, 802.1X (security authentication), 802.1Q (VLAN), 802.11i (WPA2 security), 802.11e (wireless QoS) |
Antennas |
4 external fixed paddle antennas (RV340W) |
802.1X supplicant |
Yes |
SSID-to-VLAN mapping |
Yes |
Auto channel selection |
Yes |
WPA/WPA2 |
Yes, including enterprise authentication |
Access control |
Yes, MAC filtering |
Rouge access point detection |
No |
|
QoS
|
Wi-Fi Multimedia (WMM) with unscheduled automatic power save |
Performance |
|
Wireless throughput
|
PHY data rate:
2.4 GHz: 450 Mbps 964-QAM), 600 Mbps (256-QAM)
5 GHz: 1.7 Gbps (256-QAM), 2.1 Gbps (1024-QAM)
Total: Up to 2.7 Gbps
(real-world throughput will vary)
|
|
Recommended user support
|
Up to 50 users at 2.4 GHz and 124 users at 5 GHz simultaneously |
Captive Portal for guest access |
Yes |
Wireless parameters |
Frequency |
Dual concurrent radios (2.4 and 5 GHz) |
|
WLAN
|
802.11n/ac
4x4 MU-MIMO with 4 partial streams at 5GHz
3x3 MIMO with 3 spatial streams at 2.4 GHz
20 MHz, 40 MHz and 80 MHZ channels for 802.11ac
20 MHz and 40 MHz channels for 802.11n
PHY data rate:
2.4 GHz: 450 Mbps (64-QAM), 600 Mbps (256-QAM)
5 GHz: 1.7 Gbps (256-QAM), 2.1 Gbps (1024-QAM)
Total: up to 2.7 Gbps
802.11 Dynamic Frequency Selection (DFS)
MU-MIMO up to 3 clients simultaneously
|
|
Data rates supported
|
802.11 a/b/g:
• 54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2, and 1 Mbps
• 802.11n: 6.5 to 450 Mbps
- 20-MHz bandwidth: MCS 0-15 for supported data rates
- 40-MHz bandwidth: MCS 0-15 for supported data rates
802.11ac:
• 6.5 Mbps to 1.7 Gbps
- 20-MHz bandwidth: MCS 0-9 for supported data rates
- 40-MHz bandwidth: MCS 0-9 for supported data rates
- 80-MHz bandwidth: MCS 0-9 for supported data rates
|
|
Frequency band and operating channels
|
E (E regulatory domain):
2412 to ~2472 MHz: 13 channels
5.15 to 5.25 GHz: 4 channels
5.25 to 5.35 GHz: 4 channels
5.47 to 5.725 GHz: 8 channels
|
|
Transmitter output power
|
2.4 GHz
• 802.11b: 17.5 +/- 2 dBm
• 802.11g: 17.5 +/- 2 dBm @ 6 Mbps
• 802.11g: 15.5 +/- 2 dBm @ 54 Mbps
• 802.11n (HT20): 17.5 +/- 2 dBm @ MCS0
• 802.11n (HT20): 15.5 +/- 2 dBm @ MCS7
• 802.11n (HT40): 15.5 +/- 2 dBm @ MCS7
5 GHz
• 802.11a: 18.5 +/- 2 dBm @ 6 Mbps
• 802.11a: 14 +/- 2 dBm @ 54 Mbps
• 802.11n (HT20): 14 +/- 2 dBm @ MCS7
• 802.11n (HT40): 14 +/- 2 dBm @ MCS7
• 802.11ac (VHT80): 12.0 +/- 2 dBm @ VHT9SS
|
Wireless isolation |
Wireless isolation between clients |
|
Antenna gain in dBi
|
2.4 GHz: 3 dBi each antenna
5 GHz: 5 dBi each antenna
|
|
Receiver sensitivity
|
2.4 GHz
• 802.11b: -82 dBm @ 11 Mbps
• 802.11g: -71 dBm @ 54 Mbps
• 802.11n (HT20): -69 dBm @ MCS7
• 802.11n (HT40): -67 dBm @ MCS7
5 GHz
• 802.11ac (VHT20): -59 dBm @ MCS8
• 802.11ac (VHT40): -54 dBm @ MCS9
• 802.11ac (VHT80): -51 dBm @ MCS9
|
Wireless Distribution System (WDS) |
No |
Product Dimensions |
RV340W excluding antennas |
280 x 44 x 170 mm (11 x 1.75 x 6.75 in) |
RV340W with antennas |
280 x 44 x 315 mm (11 x 1.75 x 12.40 in) |
MTBF |
50000 hours |
Rack mountable |
No |
Included accessories |
Power supply, power cord, Ethernet cable |
Fan |
No |
Included accessories |
Power supply, power cord, ethernet cable |
Power Supply |
AC 100-240V/1A DC 12V/3A |
|
Certification
|
FCC Class B, CE Class B, UL, cUL, CB, CCC, BSMI, KC, Anatel |
Operating temperature |
0° to 40 °C (32° to 104 °F) |
Storage temperature |
0° to 70 °C (32° to 158 °F) |
Operating humidity |
10% to 85% noncondensing |
Storage humidity |
5% to 90% noncondensing |