AR6140-9G-2AC Specification |
System Parameters |
Processor |
4-Core |
ForwardingPerformance (LAN - >WAN + WAN - > LAN,NAT + ACL + QoS,IMIX) |
2 Gbps |
IPsec performance(IMIX) |
2 Gbps |
Fixed WAN ports |
2 x GE RJ45 + 2 x GE SFP |
Fixed LAN ports |
2 x GE SFP + 3 x GE RJ45 (can be configured as WAN) |
SIC slots |
4 |
WSIC slots |
0 (default)/2 (maximum) |
XSIC slots |
\ |
USB port |
1 x USB3.0 (compatible with USB 2.0) |
Auxiliary or consoleport |
1 x RJ45 console port |
Memory |
2 GB |
Flash memory |
1 GB |
Hot swapping |
Supported |
Dimensions and Weight |
Routerdimensions,With no mountingbracket installed (H xW x D) |
44.5 mm x 442 mm x 420 mm
|
Router dimensions,With mountingbracket installed (H xW x D) |
44.5 mm x 482.6 mm x 572.5 mm
|
Packagingdimensions (H x W xD) |
175 mm x 550 mm x 710 mm |
Rack |
IEC |
Occupied rack space |
1U |
Power Specifications, Power Consumption, and Heat Dissipation |
Rated input voltagerange (AC) |
100 V to 240 V |
Rated input frequency(AC) |
50 Hz/60 Hz |
Maximum inputvoltage range (AC) |
90 V to 264 V |
Maximum inputcurrent (AC) |
3 A |
Maximumoutputpower (AC) |
150W |
Power supplyredundancy |
Support |
Typical powerconsumption |
18W |
Maximum powerconsumption |
32W |
Fan module |
Built-in unpluggable fan modules |
Airflow |
Left to right |
Noise level |
54 dB |
Environment Parameters |
Operatingtemperature |
0ºC to 45ºC |
Operating humidity |
5% to 95% (non-condensing) |
Operatingaltitude |
< 5000 m (16404.2 ft.) |
Storage temperature |
–40ºC to +70ºC |
Storage altitude |
< 5000 m (16404.2 ft.) |
Software Features and Protocols |
|
Basic function
|
DHCP server/client/relay, PPPoE server/client, NAT, and sub-interface management |
LAN |
IEEE 802.1P, IEEE 802.1Q, IEEE 802.3, VLAN management, VLAN aggregation, MAC management, STP |
|
WLAN (AC)
|
AP management (AC discovery, AP access, and AP management), CAPWAP, WLAN user
management, WLAN radio management (802.11a/b/g/n/ac), WLAN QoS (WMM), WLAN security (WEP, WPA, WPA2, key management)
|
IPv4 unicast routing |
Routing policies, static routes, RIP, OSPF, IS-IS, BGP |
|
IPv6 unicast routing
|
Static routes, routing policies, RIPng, OSPFv3, IS-ISv6, BGP4+ |
|
Basic IPv6 function
|
IPv6 ND, IPv6 PMTU, IPv6 FIB, IPv6 ACL, ICMPv6, DNSv6, DHCPv6 |
IPv6 tunneling |
Manual tunnel, automatic tunnel, GRE tunnel, IPv6 over IPv4 tunnel, 6 to 4 tunnel, ISATAP |
|
Multicast
|
IGMP v1/v2/v3, PIM-SM, PIM-DM, MSDP, MBGP, IPv6 PIM, MLD |
MPLS |
LDP, MPLS L3 VPN, VLL, PWE3, static LSP, dynamic LSP, MPLS TE, IP FRR, LDP FRR, TE FRR |
VPN |
IPsec VPN, GRE VPN, DSVPN, A2A VPN, L2TP VPN, L2TPv3 VPN |
|
QoS
|
DiffServ mode, MPLS QoS, priority mapping, traffic policing (CAR), traffic shaping, congestion avoidance, congestion management, MQC (traffic classifier, traffic behavior, and traffic policy),
hierarchical QoS, Smart Application Control (SAC)
|
|
Security
|
ACL (v4/v6), domain-based stateful firewall, 802.1X authentication, MAC address authentication,portal authentication, AAA authentication, RADIUS authentication, HWTACACS authentication, PKI,broadcast storm suppression, ARP security, ICMP attack defense, URPF, CPCAR, blacklist, attack source tracing, online behavior management, IPS, URL filtering |
|
Management andmaintenance
|
Upgrade management, device management, web-based network management, GTL, SNMP
(v1/v2c/v3), RMON, NTP, CWMP, Auto-Config, URL-based/USB-based/DHCP deployment,
NETCONF/YANG, CLI, NetStream, IP FPM, TCP FPM, TWAMP, IP accounting, NQA
|
Safety and Regulatory Standards |
|
EMC standardscompliance
|
CISPR32 Class A
EN 55032 Class A
CISPR24
EN 55024
ETSI EN 300 386
AS/NZS CISPR32 Class A
FCC Part 15 Subpart B Class A
ICES 003 Class A
IEC 61000-3-2
EN 61000-3-2
IEC 61000-3-3
EN 61000-3-3
GB 9254
VCCI-CISPR32 Class A
|
|
Environmentalstandards compliance
|
RoHS
REACH
WEEE
|
|
Safety standardscompliance
|
IEC 60950-1
EN 60950-1
UL 60950-1
CSA C22.2 No 60950-1
GB 4943.1
|
